Today I worked on tidying up the wiring runs from the aft of the fuselage to the cockpit. I started by zip tying the antenna cables, and the baggage light, and inserting the C1036 and C1037 wires. I went back later and added some wrap-around cable protection in the areas where the wiring could run on rivet ship heads.
With the aft fuselage wrapped up, I worked on the wiring in the tunnel within the baggage compartment. Zip ties and spiral wrap were used liberally. Main concerns were ensuing nothing can contact the control rod, and protecting the wire bundles from chaffing on the lightening hole edges.
