Tonight I installed the two VA-146 flange bearings, one on each wing. The holes were already final size and deburred, so this was just a case of setting the rivets, easy! the only challenge was working around the wing stand for the right wing (the left is on the bench).
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2020/10/img_7099.jpg?resize=648%2C479&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2020/10/img_7100.jpg?resize=648%2C778&ssl=1)
These bearings will hold one of the aileron pushrods attachments. It’s a tube that runs fore and aft, and connects the fuselage pushrod the the one in the wing.