Tonight I was able to set the plane onto it’s wheels, which was a big milestone! It’s awesome to see the way it sits on the ground, the angle of the fuselage, and to be able to move the whole thing more easily.
First, I torqued up the wheel nuts to 220 inch pounds and installed the cotter pins. I had been waiting on a socket adapter that finally showed up. I had anticipated needing help to set the plane on it’s wheels, but I found a solution that worked well with just one person. I slid some lengths of 3/4 inch plywood under each main wheel, 3 per side, and then chocked the mains. That allowed me to raise the tail a couple more inches, and hold it in place using a step ladder. Then I could remove the bench that the fuselage had been sitting on, and the saw horse that was holding up the tail. It was then simple to unchock the wheels and roll it off the plywood boards.
