Today I installed the sender mount onto the firewall, then I spent time unboxing the engine and installing various fluid fittings.
The sender mount was simple. I elected to keep the third port because I’m going to use the Aircraft Speciality P-Mag mod that uses the third port.
Unboxing the engine was exciting, and a bit messy. I pulled away the cardboard box, and then broke down the foam surrounding the engine. I only went as far as I needed to access the various fluid fittings on the back of the engine. I got most of the fittings installed, hopefully I can finish installing the last couple tomorrow.
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2605-1.jpg?resize=648%2C521&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2606-1.jpg?resize=648%2C451&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2607-1.jpg?resize=648%2C465&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2608-1.jpg?resize=648%2C800&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2609-1.jpg?resize=648%2C477&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2610-1.jpg?resize=648%2C488&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2612-1.jpg?resize=648%2C826&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2611-1.jpg?resize=648%2C843&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2613-1.jpg?resize=648%2C860&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2614-1.jpg?resize=648%2C833&ssl=1)
![](https://i0.wp.com/mytwings.com/wp-content/uploads/2023/11/img_2615-1.jpg?resize=648%2C452&ssl=1)