Tonight I installed a couple of adel clamps to hold the pitot static lines, keeping them clear of the sharp edges they pass near under the panel. The routing is a little weird because I don’t want to put too sharp of a bend in the tubes. The tubes come up out of the wiring channel, pass over the wiring frame I built, come out the bottom of the forward side of the sub panel, then up through a gap between the panel and sub panel. I plan to install t-connectors on the top of the shelf behind the PFD, sending air to both the G5 and the ADAHRS unit mounted on the back of the PFD..
I then mixed up some epoxy resin and glued some zip tie holders onto the shelf.
